|
PART I GENERAL
1.1 Scope of Work
A. The work required includes furnishing and installing bullet resisting Vision
Window Assemblies of the sizes and quantities indicated.
B. The bullet resistant vision window assemblies must be Underwriters Laboratories
listed and bear a U.L. Label for the
ballistic
threat level as defined by the standard of Safety U.L. 752
bullet resistant equipment.
NOTE to the specifier: If the window must have a higher ballistic rating than those
tested by U.L., then use this working: "The bullet resistant vision window assemblies
shall be manufactured to resist the (insert weapon, ammo type and
number of shots it must resist)
."
1.2 SUBMITTALS
A. Provide the manufacturer's specifications, data and other information which
substantiates compliance with the specified performance requirements.
B. Provide approval drawings that indicate sizes, details and installation
procedures for the bullet resistant vision window unit(s) required.
PART II PRODUCTS
2.1 MANUFACTURERS
A. Provide the products of the following manufacturer or equal;
1. National Bullet Proof, Inc. (800-323-2648), fax
708-430-3406. Model SRFV______(insert
model #_______).
2.2 Bullet Resistant Window Framing
A. Materials - All bullet resistant frames will be manufactured from Balistex(R) 38P
bullet resistant steel in accordance with UL® 752. (For higher ballistic levels, delete UL® 752 and
add: "The manufacturers independently tested assemblies to resist the
specified ballistic level.")
B. Construction -
1. The window framing shall be framing type SRFV is
manufactured by NATIONAL BULLET PROOF, INC., 1-800- 323-2649, or equal.
2. The framing shall be welded and include all accessories and be U.L.
Listed.
3. The frames shall be mitered corners for a neat and tight seam after
assembly.
4. The interior frame stops shall be prepared for ______(specifier
pick either sound transmission or sealed glazing).
5. Finish of the frames shall be prime painted. (Option: stainless
steel)
6. Manufacturer shall provide anchoring preparation as required for a
proper installation.
C. Large window option: bullet resistant frames to be divided in sections with
bullet resistant mullions. The design of the mullion shall be
:__________(specifier pick either narrow design or SRF with removable stops).
2.3 Bullet Resisting Glazing
A. Materials - The bullet resistant glazing shall be U.L. Listed for the ____
ballistic threat level and consist of laminated glass with polyvinyl interlayer
______" thick or equal.
PART III EXECUTION
3.1 Site Work - The installer of the bullet resistant vision window assemblies will be
responsible to assemble the framing, anchor deal trays and framing to surrounding wall (to
be built by buyer) and install the bullet resistant glass for a complete installation
according to the manufacturer's printed instructions. |
|